A brief introduction to working in professional audio
Those sticking-out things on the sides of your head - what are they for?
A brief introduction to compression for the home recording studio
Windows 8 brings performance improvements to Sonar
Make an attention-getting lo-fi introduction for a track
Fuchs Audio Technology Introduces Tripledrive 30-Watt
How much better could you play your instrument?
Avid and Abbey Road fall victim to surprisingly bad web audio
"Welcome to My World" by Kevin Michael Kappler
Recordings of speech by newly-starting Audio Masterclass students
Taking a close look at the mic (youll have to), Dr Watsons first reaction might have been to say, Holmes, its a cardioid!. Of course, it wouldnt be the first miniature mic to have a directional pattern, but it would be unusual. Watson was of course judging from the mics external appearance, and slots behind the diaphragm are always a tell-tale give-away that a mic is directional. Except in this case. Holmes would of course have deduced that the tiny holes in the end of the mic were just for show, and that the slots cover what appear to be twin side-facing diaphragms. In fact, I really do think the holes in the end are for show since I couldnt discern any vast difference in the sound quality when I covered them with my finger. This of course has a bearing on how the microphone is positioned, even though it is an omni. Anyone with an interest in current events will have noticed how the BBC newsreaders always have their mics clipped on upside down. This is because in practice, it reduces the possibility of popping. But if the AKGs diaphragms face outwards from the sides of the mic it doesnt really make any difference which way up the mic goes. Unfortunately, the opportunity to make an individual statement in how one positions ones mics on TV goes out the window, but thats progress for you. The C577 is pretty hard to pop anyway.
You may be wondering how I know all of this without the benefit of a jewellers tool kit to cut a cross section through the casing. I just unscrewed the cover! It would seem that replacing the cable is going to be an absolute doddle with this mic, and a certain amount of cleaning could also be undertaken. Mics used in theatre have a very limited life span due to being sweated out and are treated almost as consumables. Im not sure whether one could actually clean the working parts of this mic, but you could certainly clean the grilles, which might put off disposal day a little longer. Anyway, dont buy any secondhand miniature mics from theatre sound engineers, thats my motto.
No miniature mic would be complete without a selection of miniature accessories. You know - the things that you use once and then lose. This was my only disappointment with this mic. The clips fix onto the mics cable rather than onto the body of the mic, which I suppose is inevitable with a mic this small. But you really have to press the cable hard, and the temptation to force it with a fingernail may prove irresistible. Although the cable could be replaced, I dont think that it is right that it should be so easy to stress and possibly damage in normal use. Having said that, the cable seems to be moderately tough, and it has the right degree of stiffness to make it fairly resistant to tangles. The cable isnt significantly microphonic either so you wont be troubled too much by noise from this source.
All in all. I liked this mic and I dont mind recommending it, although with mics that have to take a lot of punishment, the proof will come with real life use.