Your actions don't require reasons, just try stuff out and see.
Q: How do I make a good studio?
Would YOU pay $18 for a Waves plug-in?
The worst-sounding hit record ever?
Why you will be beaten to success by people who are no better than you
A very unusual tape recorder used for mastering
Avid and Abbey Road fall victim to surprisingly bad web audio
How waterproof is your microphone?
This composer was so obsessed with his image, he posed for his own deathbed photo while still alive
How to get a 'vintage sound' in your recordings
A question from a Audio Masterclass reader...
"How can I make a good mix for TV because I do not hear the bass in the TV transmission?"
The reason you don't hear the bass is because TV speakers are often small. Small speakers can't produce bass in enough volume to fill a room. Although some people have hi-fi speakers connected to their TV sets, they are in a tiny minority compared to the rest of the TV-viewing population.
You could try an experiment like this... Create a mix on your studio monitors in which the bass instrument is heavily filtered, so that only the fundamental pitches of the notes come through. You could try a 24 dB/octave low-pass filter at around 200 Hz for a start. Tweak the cutoff frequency downwards until the only bass you hear is a low rumble.
Now play the mix through your TV. I'm sure you can work out a way to do it. It is very likely that the bass is completely inaudible. Clearly this is not going to be a good TV mix.
Fortunately there is a solution. This is to use a bass sound that is rich in harmonics. Often all you have to do is make sure you don't EQ out the harmonics, at the guitar, the amp or in the mix.
When played through a TV loudspeaker, the fundamental pitches will still be too low in frequency to be audible. But the brain has a way of filling in the missing fundamentals from the pattern of harmonics it hears. If the harmonics are there, the bass will be clearly audible. This applies to the kick drum in a similar way.