Facebook social media iconTwitter social media iconInstagram social media iconSubmit to Reddit

An Introduction to Compression: Basic Compression - A free download from Audio Masterclass

An Introduction to Equalization - A free download from Audio Masterclass

Equipping Your Home Recording Studio - A free download from Audio Masterclass

The weirdest Neumann mic you've ever seen!

"Just a Riddle" by Tony Danes Higgnbe project

Can a pianist's wrong note played in 1962 be fixed in 2013?

Fuchs Audio Technology Introduces Tripledrive 30-Watt

New vs. old guitar strings: Part 2 - The case for used guitar strings

Build a working turntable from CARDBOARD, courtesy of Kid Koala

Puremagnetik Releases Vespine - Sounds of the EDP Wasp

Why does a microphone need a shock mount?

Can you record a drum kit entirely with Shure SM57 mics? Barry Rudolph can.

Spend $3600 on a microphone, then find that your recordings are no better than before

Q: When should I normalize, and by how much?

A RecordProducer.com reader wonders about normalization. Should he do it? Should he normalize all the way?

In the days of analog recording it was important to set the recording level so that signals peaked close the the maximum allowable level before distortion would occur. In this way, normalization happened almost automatically. No-one would ever think about normalizing a signal after recording, and in any case it would cause further noise and distortion.

It is nowhere near as important in multitrack digital recording to set the level anywhere near peak. The signal-to-noise ratio of a 24-bit digital recording is so vast and the amount of distortion so small that for any practical purpose it wouldn't matter if your signal level was 20 dB below peak.

Except...

You might worry that the meters hardly twitch when you play the track, and the waveform display looks like a straight line. Well you can live with that. The only problem might be if you are mixing and have pushed the fader all the way to the top, and the signal isn't as loud as you want it.

What you can do is add gain, if you have a gain plug-in. Or you can normalize the track.

If you waste spend time on audio forums, then you might be led to believe that all manner of ills are caused by normalization.

However the truth is that if doing it makes things more convenient for you in some way, just do it without a second thought. It is true that any process you carry out on a signal degrades it slightly. But it really is a tiny difference that you probably won't hear and your client or market certainly won't.

Now, the question of 'how much'...

Your normalization plug-in might have options. It might offer 'peak' or 'RMS'. Choose peak... RMS is a different issue that I'm not talking about here.

Also it might offer a level to normalize to, from 0 dBFS down to some arbitrarily low value. Choose 0 dBFS and normalize all the way to the top. If you're going to normalize, it would be hard to find a reason not to.

So in summary, don't bother normalizing unless you feel that you need to. If you feel you need to, do it without a second thought, and go all the way to the top.

P.S. Normalizing your finished mix file is a different issue.

By David Mellor Saturday April 16, 2011